Software for Dynamics GP & BC
Customization DS1512
MO Manager
Problem Definition:
ACME produces large Design to Order/Configure to Order/Engineer to Order equipment for the horticulture industry. They use Dynamics GP Manufacturing with WilloWare’s MO Generator. A “Master Assembly” (top level item) may be made from … more...
Customization DS1142
COGS Allocation
Problem Definition:
ACME is a utility-scale manufacturer of tubular wind towers. They use GP Manufacturing in an actual cost environment. They record WIP Labor and actual material consumption. One MO produces one (and only one) serial-numbered … more...
Customization DS0253
Kits with Decimal Quantities
Problem Definition:
ACME sells Aggregate and Ready Mix, and is using Kits. Inventory is sold in tons, but GP forces the Kit item to have zero quantity decimals. ACME needs to be able to … more...
Customization CR1666
Change Item Standard Cost from Excel List
Description of Need:
ACME does not use GP MFG, and can use the GP Change Item Standard Cost window to update an individual item standard cost. Doing so will update the … more...
Customization DS1238
PO Invoice Non-IV Item Lookup
Problem Definition:
ACME imports PO Receipts (Shipments) without a Purchase Order. The PO Receipts are for non-inventory items. When they enter the PO Invoice, because there is not a Purchase Order, the Receipts … more...
Customization CR1397
Picking Ticket by Bin-Zone
Description of Need:
ACME stores some products inside the building, and others are kept outside. To make Sales Fulfillment more efficient, they would like the SOP Picking Ticket to group bins by inside vs. … more...
Customization DS1560
External Component Selection App
Problem Definition:
ACME needs a simple barcoded component picking solution that is outside of GP. The picking of the components does not need to update the MO in GP. Rather, it should save the … more...
Customization DS0901
Pick Ticket Resorting
Problem Definition:
ACME has multi-bins enabled in GP, but finished good inventory is all in one bin. To make it more efficient to pick inventory during order fulfillment, ACME would like to arrange the lines … more...
Customization CR1006
Parts List Utility
Description of Need:
ACME needs to report on components within a top-level item, in the manner shown below. Rather than an “Exploded BOM,” this is more of a “Parts List.”
ACME will need to run … more...
Customization DS1262
Discontinued Inventory
Problem Definition:
ACME uses Dynamics GP. When they discontinue an item, they need to ensure they sell the remaining inventory of the item before transitioning to its replacement, and they need to ensure the replacement item … more...
Customization CR1348
Kit Window Security
Description of Need:
ACME uses Inventory Kits. In addition to users who create/edit/maintain the Kit setup, there are other users who need to view the Kits. Since Dynamics GP does not have a Kit Inquiry … more...
Customization CR0971
Consignment Transfer
Description of Need:
ACME sells/fulfills inventory out of Consignment Sites. When an Order is entered it allocates inventory in the primary site called ITASKA. When the order ships, they unallocate each line, transfer the inventory to … more...
Customization CR1196
MFG Auto-allocation from Multiple Bins
Description of Need:
When Manufacturing Allocates inventory it does so only from the Default Material Issue Bin set up on the Item-Site. If there is not enough inventory in that bin, the user … more...
Customization DS1115
WIP Cost Reversal
Problem Definition:
ACME builds water dispensers. Some units contain high value assemblies which are treated as capital equipment, so the value is not in an inventory account. When these assemblies are used on a manufacturing … more...
Customization DS1452
Lot Adjustment
Problem Definition:
ACME uses Dynamics GP lot tracking on their inventory items. Sometimes during stock counts they will find that a Lot Number is incorrect in GP for the physical inventory counted, so they need to … more...
Customization DS0835
Return Item Number Swap
Problem Definition:
ACME has a Salesforce.com integration into GP. When a piece of equipment is pulled from a customer‘s home and returned, it is currently coming back into the system as the same Item … more...
Customization DS1192
Inventory Adjustment Number in
GL Header Reference
Problem Definition:
When Dynamics GP posts an Inventory Transaction to the General Ledger, the GL Transaction Header “Reference” field contains “Transaction Entry”, as shown below:
ACME would like the Reference Field … more...
Customization CR1206
Lot Number Suffix by Receipt
Description of Need:
ACME can receive multiple receipts of the same Lot Number over a period of time. They need to be able to select Lots for use in Manufacturing by the order … more...
Customization DS1068
Always Backorder
Acme would like to be able to enter a Sales Order, and always have the quantity backordered, even if there is availability.
When they are ready to ship an order, they allocate the order … more...
Customization DS1184
PO Receipt User-Site Restriction
Problem Definition
At any given time, Acme, Inc. will have a large number of open Purchase Orders and In-Transit Transfers for each of their multiple locations. The large volume of open transactions makes using … more...
Customization DS1261
Historical Stock Status with Lot Numbers
Acme, Inc uses Microsoft Dynamics GP. Dynamics GP provides a Historical Stock Status Report by Item Number, but Acme needs Lot Number level detail.
A new Historical Stock … more...
VT1257
ACME sells landscaping products, such as stones and pavers. They have numerous stores in their State. Due to the difference in the cost of transport to get materials from the manufacturer or quarry to the different stores, each store … more...
DS1007
Consignment Inventory
ACME Co makes generator powered lighting units used on construction sites. Each unit is lot numbered, and there is a quantity of 1 for each lot number (the lot numbers are effectively serial numbers). The … more...
ACMECO makes innovative carrying solutions for the imaging world. These are specialized backpacks, shoulder bags, camera pouches, rolling cases, etc., designed specifically for the needs of photographers and videographers.
Their worldwide distributors place orders on Business Portal, … more...
ACMECO manufactures equipment for Oil and Gas drilling. The materials used (steel) in the manufacturing process have a large amount of testing data associated with each Lot Number that need to be tracked from purchasing through to … more...
ACMECO manufactures forged steel pressure flanges. The materials used include alloys, stainless, and carbon. The material in stock has a wide range of physical attributes, some of which are coded into the Item Number. To fulfill customer … more...
ACMECO sells drywall and other building materials. The products are purchased from vendors in many different units of measure, but are always treated as “eaches” by ACMECO.
For example, drywall is purchased per Thousand Board Feet, but … more...
ACMECO sells direct (where they act as a distributor), and also as a representative of a manufacturer. In the rep sales, ACMECO receives a commission from the manufacturer for the sale, but manufacturing, order fulfillment and invoicing … more...
ACMEco imports and sells granite slabs. Granite is shipped in a Bundle, which contains a number of Slabs granite where the total square footage contained in the Bundle is about 300 square feet. A Slab is approximately … more...
ACME Co. uses Sales Transactions to record internal transfers of material between facilities, however the process is highly manual and time consuming.
Their current process entails the following:
ACME Co. plans to purchase two WilloWare products:
In addition to the functionality that these two products provide, ACME requires additional features:
DS0796
Item Current Cost by Site
ACME Co utilizes Dynamics GP with a multi-Site environment. Dynamics GP stores each Item’s Current Cost at the Company level. ACME Co requires the ability to track an Item’s Current Cost by … more...
ACMECO uses lot numbered inventory in Dynamics GP. While the main transaction windows in GP can use any unit of measure from the Item’s Unit of Measure Schedule, the Lot Number selection windows are all in the … more...
ACME Co. makes nutritional supplements and drinks. There are two areas of need.
Multi-Bin Enhancements
GP is being implemented with multi-bins where each bin represents a different physical location. Bins are being used in this manner so … more...
ACME CO. uses a Sales Process Hold ID that prevents Fulfillment. This hold is used while final determination is made of the quantity the customer will order. The hold also prevents allocation.
When ACME removes the Hold, … more...
ACME Co. needs to prevent accidental transfer of inventory from a QA location into “released” inventory. The need the following:
ACME Co. has some items with Manufacturer’s Serial Numbers (or Lot Numbers) up to 40- characters in length. These Ser/Lot Numbers need to be printed in Sales Transaction Entry.
When the long Ser/Lot items are received in … more...
ACME Co. produces serial numbered units with several serial numbered subassemblies. Many of these items are from subcontractors and never go through ACME inventory.
GP Manufacturing is used to produce the complete unit, and many of the … more...
ACME Co. develops and manufactures molecular diagnostic tests.
When QA controlled material is received, it is put into a QA site in GP. Since there are no restrictions on which sites users have access to, and different … more...
ACME Co.’s activities include fishing, trading, processing and marketing with offices and operations in strategic locations around the world. Their customer base includes famous brands, tuna processing plants and fishing companies.
They currently utilize Dynamics GP with … more...
ACME has found that their Item Engineering Data and their Item Resource Planning records are not in sync. ACME would like the Item Engineering Data window “BOM Should Treat As Field” to be the master control for … more...
ACME Co. utilizes an EDI system to import the majority of their Sales Order Documents into Dynamics GP. Based on the rules of their EDI system, all Order ID’s have been set up to “Allocate by Line” … more...
ACME Co. currently utilizes Dynamics GP to manage and support Inventory Control. In conjunction with the Inventory Control module they also use Manufacturing. The manufacturing process handles make to stock counter tops (a.k.a. Granite Slabs) and sinks … more...
ACME Co. is a Contract Research Organization (CRO) who utilizes Dynamics GP as its ERP system. ACME’s Supply Chain group frequently utilizes the Item Stock Inquiry window. The Item Stock Inquiry window defaults the quantities displayed to … more...